Mold Damage

Specializing in Mold Remediation

We will address the issues promptly Just how far reaching the effects of mold may be is yet to be determined. What is clear is that living or working in a moldy home or building is ill advised. The obvious response is to address water intrusion issues promptly and thoroughly, before mold has a chance to grow. ServiceMaster of Alaska is an industry leader in professional water damage mitigation and restoration services and stands ready to serve you.

If the drying of wet building materials is commenced within 24 hours (assuming clean water), the chances of preventing mold growth are excellent. If building materials remain wet, it is inevitable that mold will start to grow. Therefore, addressing and eliminating moisture problems is the critical first step. Simply put, “Got Moisture? Got Mold!”

However, once mold is present, drying is not enough. Moldy materials must be either removed or decontaminated. Proper remediation procedures will be determined by the size, scope and nature of the mold contamination.

Ten Things You Should Know About Mold

  1. Potential health effects and symptoms associated with mold exposures include allergic reactions, asthma, and other respiratory complaints.
  2. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
  3. If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
  4. Fix the source of the water problem or leak to prevent mold growth.
  5. Reduce indoor humidity (to 30-60%) to decrease mold growth by: venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning.
  6. Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
  7. Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
  8. Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
  9. In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
  10. Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.